FPZ regenerative blowers create vacuum by “regenerating” air molecules. As the impeller blades pass the inlet port, they draw air in. The rotation of the impeller pushes the air outward and forward in a spinning motion. Each time the impeller blades strike the air molecules it causes them to spin faster thus creating higher vacuum levels. For single stage blowers, air travels around the blower housing one time and is then discharged. Two-stage blowers can provide higher vacuum levels. For two stage blowers, air makes one revolution around the front side of the impeller and is then channeled to the backside of the impeller. The air makes another revolution around the backside of the impeller and is then discharged.
Standard blowers include 208-230/460-60-3; 200/400-50-3 recognized TEFC electric motors. Special voltages, single-phase motors, and belt driven blowers are also available.
- Quiet Operation
- Low weight aluminum construction
- Mountable in any orientation
- Multiple horsepower options available
- Airflow capacities over 750 cfm available.
- Vacuums over 14” Hg
- Single or Dual Stage blowers available.
- No lubrication / maintenance required
- Continuous Duty Operation
BUSCH R5 MODEL 0100 VACUUM PUMP
BUSCH R5 MODEL 0100 VACUUM PUMP Rotation of the pump rotor, which is mounted eccentrically in the pump cylinder, traps entering vapor between rotor vane segments. As rotation continues, vapor is compressed and discharged into the exhaust box. Vapors then pass through several stages of internal oil and smoke eliminators to remove 99.9% of lubricating oil from the exhaust. Oil is then returned to the recirculating oil system. Additional features include automotive type spin-on filter, a built-in inlet anti-suckback valve that prevents oil from being drawn into the system when the pump is stopped, and a built-in gas ballast, available on the RA version, which permits pumping with high water vapor loads.
- Free Air Displacement (CFM) 63
- Max. Sound Level (dBA) 71
- Motor Size (Horsepower) 5
- Motor Rotational Speed (rpm) 1750
- Approx. Oil Capacity (Qt.) 2.7
- Inlet Connections -NPT (inch) 1 1/4
- End Vacuum Torr (RC) 15
- End Vacuum Torr (RA) 0.5
- Approximate Weight (lbs.) 198
*Minimum CFM continuous flow. Under minimum flow conditions or less, relief valves are mandatory.
|
|
