|
Standard Features & Optional Accessories
Industrial-quality Reliable Components
At CNT Motion Systems, we know that purchasing a CNC machining center is one of the most important business decisions you’ll ever make. And, while we engineer all of our products for performance, flexibility and affordability, we also believe that they are only as good as the quality of the components we put into them.
We use components with many years of proven success. Our component selection is driven by quality, not price, bringing consistency with no surprises. From our standard equipment, like high-load-carrying durable Hiwin bearings, to our optional tool changers and vacuum system, we provide what you need to consistently get the most out of your machine.
As your manufacturing needs continue to grow, you can rest assured knowing that your machine will perform efficiently and reliably for years to come.
Tool Changing System
CNT Motion offers tool changers for all of our standard and custom machines. The system features a 10-HP HSD, Mach Swiss, Perske or Elte ISO-30 or HSK-F63 tool changer, available in one-tool increments. Each tool changer also features ISO-30 cones with either ER32 collets (for up to 3/4" bits) or ER40 collets (for up to 1" bits).
|
 |
Vacuum System with Blower
CNT Motion’s vacuum system features a plenum grid made of aluminum-cast tool and jig plate. Aluminum is the material of choice of all manufacturers of heavy-duty machines due to its greater stability than plastics or composites. Two available blower styles are geared toward specific applications: a 25-HP FPZ regenerative blower; or a 7.5-HP Rietschle Zephyr claw pump.
|
|
Hiwin Ball Screws
HIWIN precision ball screws provide smooth and accurate vertical Z-axis movement, together with low-drive torque, high stiffness and quiet motion. Other benefits include high efficiency, reversibility, backlash elimination and high lead accuracy.
|
|
Micro-misting/Coolant Systems
For non-ferrous metal fabrication, CNT offers three different misting systems to keep your tooling and material from over-heating. We’ll help you choose the best system to suit your needs.
Vegetable-oil-based Misting System
Best for light-duty applications and most-economical
Uses minimal amount of oil to minimize spoil board contamination
Small reservoir and leaves trace amount of oil on part.
SMC Water-based Misting System
Best for deep drilling and milling
Available with small or large reservoirs
Controls amount of fluid and air on part
Best used with a vice or mechanical hold-down
SMC Denatured Alcohol-based Misting System
Best for sheet and extrusion work
Leaves part cold and dry
No contamination of spoil board
Available with small or large reservoirs
Use with any hold-down system
|
 |
Optional Tabletop Lathe for 1000 & 950 CNC Router
CNT's add-on lathe unit provides the versatility to turn intricate lathe work on your CNC Router without sacrificing the existing work envelope. The lathe option is available in a variety of sizes based on table length, width and bridge clearance. When purchased with a new machine order, they are designed to align by matching precision pins on the bottom of the lathe to corresponding holes in the vacuum grid. For existing machines, a program is provided that will machine these location holes in your vacuum grid for fast and accurate location and mounting.
- CNT’s Optional Tabletop Lathe Features:
- Lathe C-axis;
- Customer-specified orientation: limited by table length, width and bridge clearance;
- Nabtesco 53.5:1 gear ratio;
- 30 RPM (maximum) spindle rotation C-axis;
- Three jaw chucks for custom dog or part-holding fixture;
- Tail stock on plate slide;
- Danaher servo motor and drive and all cables;
- Locating pins for easy removal and installation to vacuum table surface.
|
|
32-MM Head
Allows you to drill 1-15 holes simultaneously, making your CNC machining center compatible with 32-mm applications. However, some 32-mm applications require point-to-point machines to perform end boring, which requires a special head assembly and fixturing. This system is not suited for nested-based manufacturing.
|
|
HIWIN Bearings
Using recirculating balls between the rail and the block, the HIWIN four-row guideway achieves high-precision linear motion that can withstand substantial loading in perpendicular and traverse axes. HIWIN bearings also have less friction than other linear guideway systems. This world-class bearing system satisfies all the requirements of any highly accurate linear guidance system. Shown with CNT’s built-in, pressurized air and lubrication system.
|
|
Spindles, Routers and Saws
CNT Motion offers a variety of accessories are available for numerous CNC machining applications. ( Download our latest price sheets for a complete listing of available accessories.)
|
|
Computer Controller Cabinet
Every CNC machining center that we sell is delivered with an IBM-compatible Pentium PC controller. This durable, steel, NEMA 12-rated, pressurized cabinet houses both the PC and the electronics for your machine and is the best way to keep your equipment protected from your workshop environment.
|
 |
|
|
